Exterior Storage Door Repair for a Local Coffee Shop
This commercial door repair project in Portland OR was completed at a local coffee shop to restore security and functionality to an exterior storage door. First, our team inspected the damaged panel and hardware to identify the main issues affecting the door. Then, we planned the repair to ensure a durable and professional result for the business.
At Frank’s Handyman Service, we specialize in commercial door repair in Portland OR, helping local businesses keep their properties safe, functional, and professional.
🏪 Project Overview
The coffee shop relies on this exterior door to protect supplies and inventory. Unfortunately, the existing door panel was damaged, and the latches were completely worn out and no longer functioning as they should.
Before starting the repair, our team picked up:
- New plywood for the damaged door panel
- Fresh paint to match the existing finish
- New latches and hardware for secure closure
Our goal was to restore the door so it would be strong, aligned, secure, and visually consistent with the rest of the building.
🛠️ Step-by-Step Repair Process



1️⃣ Measuring and Cutting the New Door Panel
The first step was cutting a new piece of plywood.
We carefully measured the height of the damaged panel and marked the cut to ensure everything would line up correctly.
Using a straight edge, we drew a clean line and cut the plywood with a hand saw for accuracy.
2️⃣ Removing the Old Panel
While one team member prepared the new plywood, the other removed all the screws from the inside of the door so the old panel could be taken out safely.
💡 Pro Tip:
It’s important to remove every single screw before pulling out the old plywood. Behind the panel is a structural frame that supports the door, and missed screws can make removal much more difficult.
3️⃣ Installing and Aligning the New Panel
Next, we removed the damaged plywood panel and installed a new piece cut to the exact size of the door. At the same time, we checked the door frame to make sure it was solid and properly aligned before securing everything in place.
At this stage, proper centering and alignment are critical.
💡 Key Tip:
Always check alignment before fully securing the panel.
If the door is not centered, it won’t open or close smoothly, and you may need to remove everything and start over.
After confirming everything was squared and aligned, we reinstalled the screws to secure the panel firmly in place.
4️⃣ Painting and Finishing
With the new panel installed, we moved on to painting.
We used:
- A large brush for the main surfaces
- Smaller brushes for edges and tight areas
The paint color was carefully matched to the original finish so the door looked clean, uniform, and professional.
5️⃣ Installing New Hardware and Latches
Next, we installed new latches and hardware, allowing the door to close and lock securely again.
Using a hammer, we made fine adjustments to ensure everything fit correctly and functioned smoothly.
6️⃣ Final Touch-Ups
The final step included small touch-ups and cleanup to ensure the repair met professional standards.
The result was a fully functional, secure exterior door, ready to protect the business’s inventory once again.
This type of commercial door repair in Portland OR is essential for businesses that rely on secure storage doors, especially coffee shops and retail locations that handle daily inventory and equipment.
✅ Final Results
- Repaired and reinforced exterior storage door
- New plywood panel properly aligned and secured
- Fresh paint matching the original finish
- New latches and hardware for improved security
- Clean, professional result for a commercial property
📍 Service Area
This project was completed in the Portland, Oregon area, where we proudly serve local businesses and commercial properties.
📞 Need Commercial Repairs in Portland, OR?
If your business needs door repairs, hardware replacement, painting, or general handyman services, Frank’s Handyman Service is here to help.
👉 Request a free estimate today
🌐 https://frankhandymanservice.com/
📞 (503) 875-7976

