Installing sliding glass shower doors can add a sleek and functional touch to your bathroom. In this project, Frank’s Handyman Service demonstrates how to carefully reinstall sliding doors in a remodeled bathroom. Follow these steps to ensure precise measurements, proper leveling, and a secure installation while avoiding damage to the surrounding tiles.
Watch the full video below for a detailed walkthrough:
🚿 DIY Sliding Shower Door Installation | Frank’s Handyman – YouTube
Materials Needed
- Sliding shower door kit (including tracks, glass doors, and hardware)
- Measuring tape
- Drill with tile drill bits
- Level
- Screws and anchors (provided in the kit)
- Screwdriver
- Weatherstripping (provided in the kit)
- Silicone sealant
- Safety goggles and gloves
Step-by-Step Process
1. Prepare the Area
- Inspect the space: Ensure the shower area is clean and free of debris from the recent remodeling.
- Protect the tiles: Use masking tape or protective padding if needed to prevent accidental scratches or damage during installation.
2. Measure and Mark
- Mark the holes: Measure and mark where the track and brackets will be attached to the walls and base.
- Double-check alignment: Use a level to ensure that the track and markings are straight, as this will ensure smooth operation of the doors.
3. Drill Holes in the Tiles
- Use a tile drill bit: Carefully drill into the marked spots on the tiles. Work slowly and steadily to avoid cracking the tiles.
- Insert anchors: Place wall anchors into the drilled holes to secure the screws.
4. Install the Track
- Attach the base track: Secure the bottom track to the shower base using silicone sealant and screws.
- Install the side tracks: Attach the vertical side tracks to the walls using screws and anchors, ensuring they are aligned with the base track.
- Fit the top track: Position the top track on the side tracks to complete the frame.
5. Attach the Glass Doors
- Hang the doors: Carefully lift the glass panels and slide them onto the rollers or brackets as per the manufacturer’s instructions.
- Adjust the alignment: Ensure the doors are level and move smoothly along the track.
6. Add Weatherstripping
- Seal the edges: Attach the provided weatherstripping to the edges of the glass doors to prevent water leakage.
- Apply silicone: Use silicone sealant to fill gaps along the track for added waterproofing.
7. Test the Doors
- Open and close the doors multiple times to ensure they operate smoothly and securely. Make adjustments as needed to achieve proper alignment.
Pro Tips
- Work carefully with tiles: Drilling into tiles requires patience. Let the drill do the work and avoid applying too much pressure.
- Follow the instructions: Each shower door kit may have unique assembly steps, so read the manufacturer’s manual thoroughly.
- Use safety gear: Wear goggles and gloves to protect yourself from sharp edges and debris.
- Inspect for leaks: Once installation is complete, test the shower to ensure no water escapes through the edges.
Video Walkthrough
Watch the video below for a complete demonstration of the installation process:
Conclusion
Installing sliding shower doors is a manageable DIY project that can enhance the functionality and appearance of your bathroom. By following these steps, you can ensure a secure and professional installation. For expert help with bathroom renovations, Frank’s Handyman Service is here to assist.
Call us at (503) 522-2672 for a free estimate or visit our website to learn more about our services.